Return-Path: Received: from fed1rmmtao11.cox.net ([68.230.241.28] verified) by logan.com (CommuniGate Pro SMTP 4.2) with ESMTP id 386059 for flyrotary@lancaironline.net; Mon, 30 Aug 2004 23:29:28 -0400 Received-SPF: none receiver=logan.com; client-ip=68.230.241.28; envelope-from=ALVentures@cox.net Received: from BigAl ([68.107.116.221]) by fed1rmmtao11.cox.net (InterMail vM.6.01.03.02.01 201-2131-111-104-103-20040709) with ESMTP id <20040831032857.JPNR11100.fed1rmmtao11.cox.net@BigAl> for ; Mon, 30 Aug 2004 23:28:57 -0400 From: "Al Gietzen" To: "'Rotary motors in aircraft'" Subject: Redrive oil supply Date: Mon, 30 Aug 2004 20:29:13 -0700 Message-ID: <000001c48f0a$afc673c0$6400a8c0@BigAl> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0001_01C48ED0.036A0CC0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6626 Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C48ED0.036A0CC0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Subject: [FlyRotary] Re: Engine run - Good news/bad news =20 Surgery completed successfully; patient fully recovered. Entire = procedure took about an hour. =20 Al Hello all, Just back from vacation (Colorado, so beautiful I had to buy some dirt there). I talked to Al and it is obvious that his rear prop shaft = bearing did not get drilled prior to delivery. I've made many screw-ups but = this was a new one. Gave him instructions on how to drill but forgot to tell = him that an AN fitting screwed into the port helps guide the bit to center = of bearing groove (not critical though). =20 =20 ------=_NextPart_000_0001_01C48ED0.036A0CC0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Subject: [FlyRotary] Re: Engine run - Good news/bad news

 

Surgery completed successfully; = patient fully recovered.  Entire procedure took about an = hour.

 

Al

Hello all,

Just back from vacation (Colorado, so beautiful I had to buy some dirt = there).  I talked to Al and it is obvious that his rear prop shaft bearing did = not get drilled prior to delivery.  I've made many screw-ups but this was a = new one.  Gave him instructions on how to drill but forgot to tell him = that an AN fitting screwed into the port helps guide the bit to center of = bearing groove (not critical though).

 <= /font>

 

------=_NextPart_000_0001_01C48ED0.036A0CC0--