|
> I've made many
screw-ups but this was a new one.
On the subject of screw-ups, I better come
clean after all my comments about bad data from my EM2. I fried it. Tracy's instructions are very insistent about grounding
all unused inputs - right. I wasn't using Air Temp 2, so I grounded ALL the
wires for it. Apparently the red one is 5v+, not an "input". Who knew?
My EM2 is winging it's way back to Tracy
for a replacement coil or whatever it was that smoked on the board.
John (almost ready to fly, except for the
EM2).
|