Return-Path: Received: from grunt21.ihug.com.au ([203.109.249.141] verified) by logan.com (CommuniGate Pro SMTP 4.2) with ESMTP id 363508 for flyrotary@lancaironline.net; Fri, 13 Aug 2004 09:45:41 -0400 Received-SPF: none receiver=logan.com; client-ip=203.109.249.141; envelope-from=mickandfi@ihug.com.au Received: from 203-217-50-252.dyn.iinet.net.au (dinkie) [203.217.50.252] by grunt21.ihug.com.au with smtp (Exim 3.35 #1 (Debian)) id 1BvcMi-0001jk-00; Fri, 13 Aug 2004 23:45:04 +1000 Message-ID: <002f01c4813b$bbc32b00$fc32d9cb@dinkie> From: "Michael Haynes" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Turbos from the land of Oz Date: Fri, 13 Aug 2004 23:45:01 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_002C_01C4818F.8CB1DE70" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 This is a multi-part message in MIME format. ------=_NextPart_000_002C_01C4818F.8CB1DE70 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Not 100%sure what Johns turbine is but I think max replaced it with a = standard wheel that has been under cut. the compressor he replaces with = a larger one. Mine was in good nick but will also have the same mods = done.=20 Thanks all that have explained airflow / boost.=20 Cheers Mick =20 ----- Original Message -----=20 From: DaveLeonard=20 To: Rotary motors in aircraft=20 Sent: Friday, August 13, 2004 10:56 PM Subject: [FlyRotary] Re: Turbos from the land of Oz Do you guys know if they are putting in an inconel turbine wheel? Dave Leonard Hi Mick, thanks for confirming the more air less boost. I was a bit = concerned when you first mentioned more boost as that is not what we = need. From what I could tell about the mod from the photos on Macs web = site. This is how their modification works to produce more air flow but = less boost. First, they replace the stock compressor wheel with one of larger = size. Second, they reduce the effect of the exhaust mass flow on the = turbine wheel by enlarging the exhaust exit around the turbine blades = permitting some exhaust gas to slip by without imparting energy to = turning the turbine wheel and they all also enlarge the waste gate port. = These both reduce the RPM of the turbine/compressor wheel rotating = assembly. The results is you have a larger compressor wheel/blades which is = turning slower However, the larger/longer blades of the bigger = compressor wheel is "grabbing" more air on each revolution than did the = stock wheel. Now , since the compressor wheel is spinning slower due to = the exhaust mass flow diverted around the turbine wheel you get more air = volume (but less air velocity ) from the compressor blades. Also the = outlet nozzle of the compressor housing is a diffuser (slows down the = air and creates pressure). I suspect that they might also enlarge the = exit nozzle inner diameter as this will also reduce the conversion of = air velocity to pressure but I don't recall reading that so perhaps they = leave it alone.. =20 Mass flow =3D pVA (density, Velocity, Cross sectional Area) = provides the key to the reason enlarging the compressor exit nozzle = (diffuser) reduces boost. The mass continuity law says that the product = does not change - so if suddenly the mass flow encounters a larger area = (A increases) then Velocity must decrease to maintain a constant = product. Here its simply the dynamic pressure equation 1/2 pV^2. If = velocity is decreased then the dynamic pressure equation 1/2p V^2 tells = us with less V there is less energy to convert into a pressure increase. They have lowered the velocity V of the air flow into the diffuser = therefore there is less dynamic pressure (air velocity) to convert into = pressure. In other words, boost is not conditional on the amount = (volume) of air you flow - but depends on the velocity you accelerate it = to before it flows into the diffuser (among some other factors). So = you have lower velocity giving you less boost but you still have the = larger volume of air produced by the bigger compressor wheel. Ergo, you have more air flow but less boost for the same exhaust = mass flow. =20 At least thats the way it appears to me. Ed RV-6A N494BW Rotary Powered Matthews, NC ----- Original Message -----=20 From: Michael Haynes=20 To: Rotary motors in aircraft=20 Sent: Thursday, August 12, 2004 10:36 PM Subject: [FlyRotary] Re: Turbos from the land of Oz Hay John Dropped off my turbo yesterday and confirmed more air flow less = boost! I STAND CORRECTED. I Still don't under stand. Anyway Max has = taken a lot of interest in what we are doing and is researching more on = a way to control boost at alt. He did mention that the microtec computer = that is used down here a lot does compensate boost with alt but not sure = to what alt it goes to ( designed for driving in the hills ), also has = limp home mode. Ill find out more when I see him next. =20 Cheers Mick ----- Original Message -----=20 From: John Slade=20 To: Rotary motors in aircraft=20 Sent: Wednesday, August 11, 2004 12:47 AM Subject: [FlyRotary] Turbos from the land of Oz G'day Mick > I must say you did a good job on the turbine or what was left = anyway!!!. =20 Thank you, thank you. I try hard to please. :) Thanks for the update. It's a little scary dealing with a = company so far away, but Max seems like a straight up guy so I never = really had any doubt he'd come through. Just took a little longer than = I'd hoped. 400HP. Yes. he mentioned that. A bit lower at my max rpm of = 6300, but still - plenty of grunt. :) > From what he explained to me was that you will get more boost = for a slower turbine rpm, =20 I thought it was less boost for the same airflow. > He did mention something about throwing in a couple of = peacock feathers just incase you blow it again. =20 Oh! Nice touch. > Now im thinking of changing prop size. ( currently ivo 70" = variable high pitch 3 blade ) can you make any suggestions. =20 Well mines a wood 68 three blade with 314 blade area from = Performance. It'll accelerate the plane to take off in 1000 - 1500 feet = at 4300 rpm and climb quickly at 5000. It'll even climb at 2300 rpm. = Should be ideal for about 280 hp in cruise and should get me a better = top speed than a variable pitch. Given that you need 2000ft to land I'm = not sure a variable pitch prop will buy you anything on a Cozy, and = it'll probably cost you at the top end. Are you building a Cozy or an = RV? I forget. Cheers, John ------=_NextPart_000_002C_01C4818F.8CB1DE70 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Not 100%sure what Johns turbine is = but I think=20 max replaced it with a standard wheel that has been under cut. the = compressor he=20 replaces with a larger one. Mine was in good nick but will also have the = same=20 mods done. 
 Thanks all that have explained = airflow /=20 boost.
 Cheers Mick =   
----- Original Message -----
From:=20 DaveLeonard=20
Sent: Friday, August 13, 2004 = 10:56=20 PM
Subject: [FlyRotary] Re: Turbos = from the=20 land of Oz

Do=20 you guys know if they are putting in an inconel turbine=20 wheel?
 
Dave=20 Leonard
 
Hi Mick, thanks for confirming the = more air=20 less boost. I was a bit concerned when you first mentioned more = boost as=20 that is not what we need.
 
From what I could tell about the = mod from the=20 photos on Macs web site.  This is how their modification works = to=20 produce more air flow but less boost.
 
First, they replace the stock = compressor=20 wheel with one of larger size.  Second, they  reduce the = effect of=20 the exhaust mass flow on the turbine wheel by enlarging the exhaust = exit=20 around the turbine blades permitting some exhaust gas to slip by = without=20 imparting energy to turning the turbine wheel and they all also = enlarge the=20 waste gate port.  These both reduce the RPM of the = turbine/compressor=20 wheel rotating assembly.
 
The results is you have a = larger=20 compressor wheel/blades which is turning slower   However, = the=20 larger/longer blades of the bigger compressor wheel is =  "grabbing" more=20 air on each revolution than did the stock wheel. Now , since = the=20 compressor wheel is  spinning slower due to the exhaust mass = flow=20 diverted around the turbine wheel you get more air=20 volume (but less = air velocity=20 ) from the compressor blades.  Also the outlet  nozzle of = the=20 compressor housing is a diffuser (slows down the air and creates=20 pressure).  I suspect that they might also enlarge the exit = nozzle=20 inner diameter as this will also reduce the conversion of air = velocity=20 to pressure but I don't recall reading that so perhaps they leave it = alone..  
 
Mass flow =3D pVA (density, = Velocity, Cross=20 sectional Area)  provides the key to the reason enlarging the=20 compressor exit nozzle (diffuser) reduces boost.  The mass = continuity=20 law says that the product does not change - so if suddenly the mass = flow=20 encounters a larger area (A increases) then Velocity must decrease = to=20 maintain a constant product.  Here its simply the dynamic pressure equation 1/2=20 pV^2.   If velocity is decreased then the dynamic = pressure=20 equation 1/2p V^2 tells us with less V there is less energy to = convert into=20 a pressure increase.
 
They have=20 lowered the velocity V of the air flow into the diffuser therefore = there is=20 less dynamic pressure (air velocity)  to convert into = pressure. =20 In other words, boost is not conditional on the amount (volume) of = air you=20 flow - but depends on the velocity you accelerate it to = before it=20 flows into the diffuser (among some other factors).   So = you have=20 lower velocity giving you less boost but you still  have the = larger=20 volume  of air produced by the bigger compressor=20 wheel.
 
Ergo, you have more air flow but = less boost for=20 the same exhaust mass flow. 
 
At least thats the way it appears = to=20 me.
 
Ed
 
 
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- =
From:=20 Michael=20 Haynes
To: Rotary motors in = aircraft=20
Sent: Thursday, August 12, = 2004 10:36=20 PM
Subject: [FlyRotary] Re: = Turbos from=20 the land of Oz

Hay John
 Dropped off my turbo = yesterday and=20 confirmed more air flow less boost! I STAND=20 CORRECTED. I Still don't under stand. Anyway Max has = taken a lot=20 of interest in what we are doing and is researching more on a way = to=20 control boost at alt. He did mention that the microtec computer = that is=20 used down here a lot does compensate boost with alt but not sure = to what=20 alt it goes to ( designed for driving in the hills ), also has = limp home=20 mode. Ill find out more when I see him = next.  
 Cheers
 Mick
----- Original Message ----- =
From:=20 John=20 Slade
To: Rotary motors in = aircraft=20
Sent: Wednesday, August = 11, 2004=20 12:47 AM
Subject: [FlyRotary] = Turbos from=20 the land of Oz

G'day=20 Mick
> I must say you did a good job on the = turbine or=20 what was left anyway!!!.  
Thank=20 you, thank you. I try hard to please. :)
 
Thanks for the = update. It's a=20 little scary dealing with a company so far away, but Max seems = like a=20 straight up guy so I never really had any doubt he'd come = through. Just took a little longer than I'd=20 hoped.
 
400HP. Yes. he mentioned that. A bit lower at my = max rpm=20 of 6300, but still - plenty of grunt. :)
 
 > From what he = explained=20 to me was that you will get more boost for a slower turbine=20 rpm,  
I=20 thought it was less boost for the same = airflow.
 
 >  He did = mention=20 something about throwing in a couple of peacock feathers just = incase you=20 blow it again.  
Oh!=20 Nice touch.
 
 > Now im = thinking of=20 changing prop size. ( currently ivo 70" variable=20 high  pitch 3 blade ) can you make any=20 suggestions.  
 
Well=20 mines a wood 68 three blade with 314 blade area from = Performance. =20 It'll accelerate the plane to take off in 1000 - 1500 feet at = 4300 rpm=20 and climb quickly at 5000. It'll even climb at 2300 rpm. Should = be ideal=20 for about 280 hp in cruise and should get me a better top speed = than a=20 variable pitch. Given that you need 2000ft to land I'm not = sure a=20 variable pitch prop will buy you anything on a Cozy, and it'll = probably=20 cost you at the top end. Are you building a Cozy or an RV? I=20 forget.
 
Cheers,
John
 
------=_NextPart_000_002C_01C4818F.8CB1DE70--