I need some recommendations for EFI fuel pressure regulator. There are so many out there.
Bulent
 
Below is a quote from a message I sent to the list long ago. I think Todd has one of these now as well.
 

Rusty

Hi Bulent:
        I also have one of these and it seems to work well. Since I installed it and set the pressure I really haven't given it a second thought, so I suppose that means it's working great.

        The only complaint that I have, but I was able to easily work with is; I expected a gauge port to install my pressure sensor, but the 15404 model didn't have one, however it does have 2 AN6 return ports for dual rail systems which I didn't need. So I used an extra AN6 bulkhead fitting, cutting off the extra past the nut and then tapped the bore to 1/8 NPT. This worked perfect eliminating the need to plug the unused return port and the need for any extra plumbing (T's, etc.) to install the pressure sensor elsewhere.

S. Todd Bartrim
Turbo 13B
RX-9endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm

        "Imagination is more important than knowledge"
                                        -Albert Einstein